AEM Cold Air Intake 21-821DS - Nissan 370Z - Outcast Garage

AEM Cold Air Intake 21-821DS - Nissan 370Z

Name: AEM Cold Air Intake 21-821DS - Nissan 370Z
Brand: AEM
SKU: 21-821DS
Price: 429.99 USD
Availability: InStock

by AEM

$ 429.99

SKU 21-821DS

You'll earn OG Points with this product!

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Quantity

Price Match | Make an Offer

Increase Horsepower
Tuned and dyno-tested to improve acceleration and engine sound
Rotomolded Plastic Air Intake Tubing
Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
Washable and reusable oil-free filter media
AEM Lifetime Limited Warranty

The AEM 21-821DS fits some Nissan 370Z models. See vehicle applications for details.

The 21-821DS Performance Cold Air Intake System produces horsepower and torque gains by replacing the restrictive air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 370Z models. This system replaces both the left and right side intakes. The AEM Dryflow synthetic washable air filter does not require oiling and can be used up to 100,000 miles before servicing is needed (depending on driving conditions). The heatshield is a two piece design and also utilizes the factory air ducting. The intake tube is constructed from mandrel bent aluminum and has a durable gray powder coat finish. This air intake system was developed to accommodate the mass air flow sensor and PCV hose. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-821DS vehicle applications to determine the legal status for each vehicle.

AEM 21-821DS Product Specifications

Estimated Horsepower Gain	15 HP @ 7100 RPM
Replacement Filter	21-202DOSK
Air Filter Color	Red
Air Filter Material	Non-woven Synthetic
Air Filter Outlet Shape	Round
Clamps Included	6
Clamp Material	Stainless Steel
Clamp Style	Regular
Couplers Included	None
Product Style	AEM Cold Air Intake System
Intake Pipe Color / Finish	Black
Intake Pipe Material	High-Density Polyethylene
Street Legal In All US States	No
TUV Approved (Europe)	No
Weight	13.8 lb (6.3 kg)
Product Box Height	15 in (381 mm)
Product Box Length	22.2 in (564 mm)
Product Box Width	14.5 in (368 mm)
California Restricted	Not legal for sale or use in California
Mounting Hardware Included	Yes
Warranty	Limited Lifetime

Horsepower gains based on similar vehicle dynamometer test. Results will vary.

WARNING: Cancer and reproductive harm--www.P65warnings.ca.gov

21-821DS Cross Reference

Installation Instruction Sheet

21-821DS Vehicle Applications

Dyno Chart - 2016 Nissan 370Z 3.7L - 15HP Increase

News Story - Bring Your 2009-2017 370Z Up to NISMO Horsepower with an AEM Cold Air Intake

Vehicle Application

VQ37VHR Engine

2009-2018 Nissan 370Z

You recently viewed

Clear recently viewed

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

AEM Cold Air Intake 21-821DS - Nissan 370Z

You recently viewed

QUESTIONS & ANSWERS

Have a Question?

Main Menu

Added to your cart:

Body Kits Ship for FREE to Lower 48 States

AEM Cold Air Intake 21-821DS - Nissan 370Z

Related products

AEM Cold Air Intake 21-819 - Infiniti Q50 / Q60

AEM

AEM Cold Air Intake 21-744DS - Infiniti Q50 3.7 (14-17)

AEM

AEM Cold Cold Air Intake 21-548P - Infiniti G35 / Nissan 350Z (03-06)

AEM

You recently viewed

QUESTIONS & ANSWERS

Have a Question?

Main Menu

Subscribe

Follow us

WHAT'S YOUR EMAIL?