Air Lift Front Air Kit - 06-20 Dodge Charger (Fits RWD models only) - Front Performance Kit - 75527
Pay over time with Affirm. See if you qualify at checkout.
(Click to Pre-Qualify)
Please carefully review the vehicle application below before purchasing.
With the classic American rear-wheel drive platform being pretty much extinct, we applaud everyone over at Chrysler for keeping the LX platform alive! It’s hard to beat a full-size rear-wheel drive car, especially when it’s equipped with the classic Hemi V-8. As good as the LX platform is, we think the stance leaves a lot to be desired. With that in mind, we sharpened our pencils and set out to design the lowest, bolt-on, adjustable suspension possible. Low is certainly a cool statement, but “low” can be achieved in many different ways—we decided to do it the RIGHT way. What is the “right” way, you ask? Well, not only did we engineer our kit to have a ground-hugging stance, but we designed it to enhance performance handling and improve ride quality. Try getting all of that out of a set of lowering springs or coilovers!
Our front kit features a threaded body monotube shock, with 30 levels of damping adjustment, topped off with a smooth-riding, double-bellow air spring. The struts look just as sharp as they perform, from the black chromed steel shock bodies to the bright red anodized air spring end caps all attached to an anodized upper mount with a high-quality monoball bearing. Put all this together, and you can now drop the front of your LX 4.88 inches from that unsightly OEM ride height.
For the rear, we tossed out the factory coil spring in favor of our double-bellow air spring, allowing you to drop 6.69 inches from the original stock height. To make sure your rear end is not bouncing down the road, we use a 30-level damping monotube threaded body shock to complement the front shock.
Okay, so as cool as all this sounds…what does it all mean? No more sacrificing ride quality to get your car low and losing any type of load-carrying capabilities. Now you can have a nice ride while getting the stance you really want. Hauling a heavy load, or taking all of your friends out for a night on the town? With lowered coils, you would be scraping everywhere you tried to go. With an Air Lift Performance kit, now you can just push a button and level your car back out.
Feel like hitting the track or your favorite twisty road? We’ve spent countless hours at the track, fine-tuning our suspensions to give you the best handling possible. With the twist of the damping knob, you can go from a smooth street ride to a race-car-type stiffness that will have you grinning when you take your first curve at speed.
Installation is simple with Air Lift Performance’s detailed instruction manuals. If you have the skill to wire a stereo or swap suspension components, you can have your car on the ground or tearing up your favorite road course in a matter of hours. Only basic hand tools are necessary to complete the job.
As the leader in air suspension products for over 60 years, Air Lift is committed to delivering quality parts that last. To ensure longevity for the customer, the key suspension components have been tested on a durability rig for over one million cycles, which equates to 100,000 miles. With a one-year, unlimited-mileage warranty—not to mention the Air Lift reputation for great customer service and technical support—you can purchase this kit with peace of mind. Ditch those coils and get to a new level of low!
KIT FEATURES
- Drop = 93mm/3.7″
- Durable double bellows springs
- Anodized aluminum accents
- Powdercoated gloss black steel brackets
INCLUDED WITH EACH KIT
- Braided stainless steel leader hoses
- 1/4″ OR 3/8″ PTC fittings
- All mounting hardware
- Detailed instruction manual
- Air Lift’s 1-year warranty and excellent customer support
This kit features:
- 93mm/3.7" Drop
- Double Bellows Progressive Rate Springs
- 30-Level Adjustable Damping
- High Quality Spherical Ball Upper Mounts
- Threaded, Adjustable Shock Mounts
- High Performance Monotube Shocks
- Braided Stainless Steel Leader Air Hoses
- No Modifications Necessary for Installation
This kit fits:
- 2006-2020 Dodge Charger (Including SRT-8)
- *NOTE: Does not fit AWD models
Modifications Required: None.
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADDITIONAL INFORMATION
| Installation Manual | Download Manual |
|---|---|
| Warranty |
One Year Limited |
| Application Type |
Performance Front Kit |
| Aftermarket Body Kits (Authentic & Replica) |
| Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product. |
| Installation and Paint of Body Kits |
| A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint. |
| Fiberglass (FRP) |
| There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given. |
| Carbon Fiber Care (CF, CFRP) |
| All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. |
| Hand-Laid Carbon Fiber (CF, CFRP) |
| The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc). |
| Polyurethane Care, Installation & Painting (Poly) |
| All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. |
- Due to the fluctuating conversation rates, all international orders shipping to outside of the United States are non-returnable nor exchangeable.
- The purchaser will be responsible for all duties, taxes and custom fees when importing goods into their country.
- It is the purchaser's responsibility to acquire a custom's broker for international shipments.
Other top rated products
Your question will appear on the site once someone answers it.
- Reviews (0)
- Questions (0)
