Takeda Stage-2 Pro DRY S Intake System - G35 Sedan - Outcast Garage

Takeda Stage-2 Pro DRY S Intake System - G35 Sedan

Name: Takeda Stage-2 Pro DRY S Intake System - G35 Sedan
Brand: Takeda
SKU: TR-3001B
Price: 351.9 USD
Availability: InStock

by Takeda

Write a review

$ 351.90

SKU TR-3001B

You'll earn OG Points with this product!

Pay over time with Affirm. See if you qualify at checkout.

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Finish

Quantity

Price Match | Make an Offer

Info

Stage-2 Pro Dry S Intake System by Takeda - G35 Sedan

The Takeda Retain Intake is a short ram air intake system. In recent testing this intake produced 19hp and 16lbs. x ft. of torque. Takeda intakes are constructed out of lightweight black clear coat anodized tubing for maximum air flow and a great style. Each intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.

Features

Complete installation in 30 minutes or less.
This system includes a Pro DRY S oil free synthetic air filter which will never require to be oiled after cleaning.
This intake is 50-state legal (CARB E.O Number D-550-16)
Free Shipping to the lower 48 states

Note

This intake does not work with a circular mass air flow sensor.

Vehicle Application

2003-2006 Infiniti G35 Sedan

Q&A

QUESTIONS & ANSWERS

Ask a Question

I have a 2003 G35 sedan but for this product, do I have to get an aftermarket mass airflow sensor or how would find out if my sensor is a circular mass air flow sensor or not.

You can tell if your mass airflow sensor is circular or rectangular by looking at your OEM intake tubing.

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

International Orders

Other top rated products

VIS Racing Z-Speed / CS-Style Rear...

1.0 star rating

(2)

$562.00
VIS Racing Astek Front Bumper...

0.0 star rating

(0)

$665.00
OG Designs QS Front Bumper Kit...

3.2 star rating

(6)

$960.00
VIS Racing Walker / LB-Style Front...

5.0 star rating

(2)

$950.00
OG Designs Kuruma Z Arch Front...

4.2 star rating

(5)

$630.00
Hikkatadori CSL-Style Trunk -...

5.0 star rating

(4)

$715.00
K&N Typhoon Air Intake Dual Kit,...

0.0 star rating

(0)

$549.99
VIS Racing Techno-R / Nismo-Style...

0.0 star rating

(0)

$354.00

0 Questions \ 0 Answers

ask a question

write a review

ask a question

write a review

Thank you for posting a review!

We value your input. Share your review so everyone else can enjoy it too.

Thank you for posting a review!

Your review was sent successfully and is now waiting for our staff to publish it.

Thank you for posting a question!

Please click on the link in the confirmation email we just sent you to submit your question.

Your question will appear on the site once someone answers it.