Akebono Infiniti Front and Rear Big Brake Upgrade Kit - Outcast Garage

Akebono Infiniti Front and Rear Big Brake Upgrade Kit

Name: Akebono Infiniti Front and Rear Big Brake Upgrade Kit
Brand: Nissan OEM
Price: 1820.0 USD
Availability: InStock

by Nissan OEM

$ 1,820.00

SKU

You'll earn OG Points with this product!

Pay over time with Affirm. See if you qualify at checkout.

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Rotor

Caliper

Pads

Quantity

Price Match | Make an Offer

Info

Infiniti Front and Rear Big Brake Upgrade Kit by Akebono

If you are looking for an affordable Big Brake Kit, your search is over. These Kits can be found on the Q50 Sport Models. The Akebono Infiniti OEM Front Kit is a simple install, and is a Direct Bolt. Fits with original Brakes lines or Upgraded SS Lines. Works with original E-brake System.

Features

Akebono 4-Piston Front Caliper
Akebono 2-Piston Rear Caliper
Stoptech or Centric 14" Front Rotor, 13.8 Rear Rotor - Infiniti OEM Front and Rear Brake Pad Shim Kit
Infiniti OEM Front and Rear Brake Pad Pins and Clips

Vehicle Applications

2003-2007 Infiniti G35 Coupe*
2003-2006 Infiniti G35 Sedan*
2003-2008 Nissan 350Z*
2009-Current Nissan 370Z (Non Sport)
2007-2008 Infiniti G35 Sedan
2009-2015 Infiniti G37 Sedan (Non Sport)
2008-2016 Infiniti G37/Q60 Coupe (Non Sport)
2014-Current Infiniti Q50 Sedan (Non Sport)

Note

You must either trim, replace or remove the dust shields behind the brake rotor in order to allow for the proper clearance of the larger 14" brake rotors.
*For Infiniti G35 (V35) and Nissan 350Z (Z33) Applications, you will need Adapter to bolt up to Knuckle.

Q&A

QUESTIONS & ANSWERS

Ask a Question

I noticed you specified that the front kit is an easy install. "The Akebono Infiniti OEM Front Kit..." (keyword front) "...is a simple install, and is a Direct Bolt. Fits with original Brakes lines or Upgraded SS Lines." What about the rear? I have an 06 G35 Coupe and I'm looking at this setup as an alternative to the Brembo upgrade. I realize I need the Voodoo13 adapter for the front, but again: What about the rear? Thank you!

For the rear, you will need to remove the brake dust shield or trim it to prevent the larger rear brake discs from scrapping.

It is also a plug and play for the rear.

We highly recommend purchasing the stainless steel braided lines, if not, you will need to purchase banjo bolts if you use OEM brake lines.

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

International Orders