AEM Cold Air Intake 21-819 - Infiniti Q50 / Q60 - Outcast Garage

AEM Cold Air Intake 21-819 - Infiniti Q50 / Q60

Name: AEM Cold Air Intake 21-819 - Infiniti Q50 / Q60
Brand: AEM
SKU: 21-819
Price: 429.99 USD
Availability: InStock

by AEM

$ 429.99

SKU 21-819

You'll earn OG Points with this product!

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Quantity

Price Match | Make an Offer

Info

The AEM 21-819 fits some Infiniti Q50, and Infiniti Q60 models. See vehicle applications for details.

The AEM 21-819 Performance Cold Air Intake System replaces both the left and right side housings. This air intake was designed to fit some Infinity Q50 and Q60 models. Both banks uses an oval shaped AEM Dryflow Air Filter. The filter media is made from a synthetic fiber that does not require oiling. The filter also provides excellent filtration and has great air flow. Maintenance is easy since the filter can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). Individual heatshields keep out engine bay heat . The factory MAF sensor mounts directly on the supplied intake tube. The air intake system it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-819 vehicle applications to determine the legal status for each vehicle.

Features

Increased horsepower
Tuned and dyno-tested to improve acceleration and engine sound
Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
Washable and reusable oil-free filter media
AEM Lifetime Limited Warranty

AEM 21-819 Product Specifications

Estimated Horsepower Gain	10 HP @ 4000 RPM
Replacement Filter	21-2127DK
Air Filter Color	Red
Air Filter Material	Non-woven Synthetic
Air Filter Outlet Shape	Round
Clamps Included	2
Clamp Material	Stainless Steel
Clamp Style	Regular
Couplers Included	None
Product Style	AEM Cold Air Intake System
Intake Pipe Color / Finish	None
Intake Pipe Material	Not Applicable
Street Legal In All US States	No
TUV Approved (Europe)	No
Weight	11.5 lb (5.2 kg)
Product Box Height	11.63 in (295 mm)
Product Box Length	24.38 in (619 mm)
Product Box Width	12.25 in (311 mm)
California Restricted	Not legal for sale or use in California
Mounting Hardware Included	Yes
Warranty	Limited Lifetime

Horsepower gains based on similar vehicle dynamometer test. Results will vary.

WARNING: Cancer and reproductive harm--www.P65warnings.ca.gov

21-819 Cross Reference

Installation Instruction Sheet

21-819 Vehicle Applications

Dyno Chart - 2017 Infiniti Q60 3.0L - 10HP Increase

Vehicle Application

3.0t VR30DDTT Engine

2016-2020 Infiniti Q50 Sedan
2017-2020 Infiniti Q60 Coupe

Q&A

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.