
Kinetix Racing V+ Plenum - G35 Sedan
Pay over time with Affirm. See if you qualify at checkout.

Please carefully review the vehicle application below before purchasing.
Racing V+ Plenum by Kinetix - G35 Sedan
This new intake plenum replaces the upper half of your factory intake manifold. This plenum bolts directly up to your car with zero modifications, and also allows the use of the factory strut bar, and engine cover.
This plenum increases the volume to the middle and more importantly the front cylinders. The factory plenum utilizes a very aggressive angle as it caps off the front cylinders. This new plenum equalizes the flow to all cylinders, while also increasing the total plenum volume. This plenum also uses a very versatile plastic to achieve a smooth interior for superior flow properties. The plastic also allows a lighter overall weight, by about 3 lbs. The overall temperatures of the plenum have also decreased by about 50 degrees Fahrenheit. This helps with heat soak problems and to help lower air intake temperatures.
Our plenum has shown a solid peak gain of 14 rwhp and a consistent gain throughout the RPM range. When matched up with our high flow cats, they together have shown peak gains of 20 rwhp.
The plenum still retains most of all the factory mounting points and also includes all necessary new hardware. The plenum also includes a permanently adhered flange gasket that is to be used with the factory gasket as well as a new throttle body gasket.
Look for our package with our 49 State SMOG legal high flow cats for package savings.
Features
- 270% stronger than previous plenum
- Incredible heat resistance, improved 170%, now up to 500 degrees F
- Lower operating temperatures - 50 degrees cooler than ANY aluminum plenum option
- More volume! 20% more volume than factory and 12% more than our previous version
- Completely smooth underside with NO flow restrictions
- Can handle boosted cars, with lifetime warranty on cars up to 10 psi
- Read to install - Includes all necessary hardware and gaskets for installation
- Lifetime Warranty
- Comes with all Hardware necessary
Note
- Due to State Emissions Regulations, in California this product is only intended for off-road use.
- This plenum includes a lifetime warranty on manufacturer's defects. This will include any failure in the plastic material used which may effect its ability to create a seal. The cork gasket is not covered under our lifetime warranty. For those customers needing a new gasket to replace any gaskets that have been damaged during installation or repetitive installations, we offer a re-gasketing service for a minor fee.
Vehicle Application
- 2003-2006 Infiniti G35 Sedan
Aftermarket Body Kits (Authentic & Replica) |
Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product. |
Installation and Paint of Body Kits |
A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint. |
Fiberglass (FRP) |
There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given. |
Carbon Fiber Care (CF, CFRP) |
All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. |
Hand-Laid Carbon Fiber (CF, CFRP) |
The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc). |
Polyurethane Care, Installation & Painting (Poly) |
All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. |
- Due to the fluctuating conversation rates, all international orders shipping to outside of the United States are non-returnable nor exchangeable.
- The purchaser will be responsible for all duties, taxes and custom fees when importing goods into their country.
- It is the purchaser's responsibility to acquire a custom's broker for international shipments.
Other top rated products
Your question will appear on the site once someone answers it.
- Reviews (0)
- Questions (0)