aFe Power Twisted Steel Headers - Infiniti G35 / Nissan 350Z - Outcast Garage

aFe Power Twisted Steel Headers - Infiniti G35 / Nissan 350Z

Name: aFe Power Twisted Steel Headers - Infiniti G35 / Nissan 350Z
Brand: aFe Power
SKU: 48-36103
Price: 996.6 USD
Availability: InStock

by aFe Power

$ 996.60

SKU 48-36103

You'll earn OG Points with this product!

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Quantity

Price Match | Make an Offer

DESIGNED FOR PERFORMANCE

Our engineers use state of the art technology to design and manufacture the highest quality performance products in the industry.

TESTED AND PROVEN

aFe products are dyno tested with our in-house DynoJet, and our airflow products are also flow bench tested, for performance you can count on.

Disclaimer

This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Features

Constructed of 1-5/8" 16-gauge 304 stainless steel primary tubing
Mandrel-bent for unrestricted flow
3-to-1 formed collectors decrease turbulence and increases exhaust velocity
Optimized Tube Lengths Improve Flow and Performance
100% hand TIG-welded construction ensures optimal strength and durability
Made in Corona, California

Factory Mounting Locations

These headers are a direct bolt-on installation which requires no cutting or drilling to provide a hassle-free installation.

Formed Collectors

3-to-1 formed collectors decrease turbulence and increases exhaust velocity. The result is increased horsepower, torque and improved throttle response.

Heavy Duty Flanges

1-5/8" Thick 1-piece flanges are used to prevent warpage to ensure a leak-free seal over the life of the vehicle.

Optimized Tube Lengths

Tube lengths are optimized for true pulse control technology which improves flow and performance.

Test Results

In testing, the headers produced a max gain of +9 horsepower and +11 ft. lbs. of torque verified by our in house dyno* (tested on 2003 Nissan 350Z V6-3.5L)
Potential for up to +16 horsepower and +15 lbs. x ft. of torque when combined with aFe's performance Y-Pipe (P/N 48-36104-YC)

What is Included

(2) Twisted Steel Headers
(2) Bolt/Nut Assembly

Vehicle Application

2003-2008 Nissan 350Z
2003-2007 Infiniti G35 Coupe RWD
2003-2006 Infiniti G35 Sedan RWD & AWD

Engine Application

VQ35DE
VQ35DE Revup
VQ35HR

You recently viewed

Clear recently viewed

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.