

ARK Performance 304SS Polished 2.5in High Flow Cat - Infiniti / Nissan G35 / 350Z 03-06 VQ35DE Z33
Pay over time with Affirm. See if you qualify at checkout.

Please carefully review the vehicle application below before purchasing.
The ARK R-Spec Hi-Flow Cats are race spec designed free flowing catalytic converters to increase your horsepower and torque. Each Hi-Flow Cat is constructed with polished SUS304 stainless steel, thicker piping, and two O2 bungs. These Hi-Flow Cats utilize our Helmholtz style reservoir chamber technology to maintain smooth flow, a deeper tone with reduced drone, hiss, and rasp. ARK R-Spec Hi-Flow Cats are the perfect combination with any exhaust system you may have. transmission.
Features:
- All Bolt-on System
- SUS304 Stainless Steel Construction
- Fully Polished Finish
- CNC Machined Flanges
- High Flow Catalytic Converters
- ARK Signature Helmholtz Chamber
- Dyno Proven HP and TQ!
Disclaimer
- The R-Spec Hi-Flow Cats are recommended for off road use only. These only fit RWD models that are manual.
- Modification from a muffler shop required for 2003-2006 Infiniti G35 Sedan AWD.
Vehicle Application
-
MANUAL TRANSMISSION ONLY
- 2003-2008 Nissan 350Z
- 2003-2007 Infiniti G35 Coupe RWD
- 2003-2006 Infiniti G35 Sedan RWD
Engine Application
- VQ35DE
- VQ35DE Revup
QUESTIONS & ANSWERS
Ask a Question-
So these do in fact contain Catalytic converters and are not just test pipes, correct? Will I be assured that my ECU won't be throwing codes upon installation? Thanks! -Jesse
These have high flowing catalytic converters. They should not throw a CEL if the high flow catalytic converters are working properly.
-
What is the difference between the manual and automatic G35 Coupe models that they disclaim that these will only fit the manual G35 models?
These high flow cats have clearance issues with the actual automatic transmission, specifically being the hemholtz chambers.
-
Can these be used on a G35 coupe with an automatic transmission?
Yes this product is compatible with the G35 coupe with an automatic transmission.
Aftermarket Body Kits (Authentic & Replica) |
Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product. |
Installation and Paint of Body Kits |
A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint. |
Fiberglass (FRP) |
There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given. |
Carbon Fiber Care (CF, CFRP) |
All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations. |
Hand-Laid Carbon Fiber (CF, CFRP) |
The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc). |
Polyurethane Care, Installation & Painting (Poly) |
All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations. |
- Due to the fluctuating conversation rates, all international orders shipping to outside of the United States are non-returnable nor exchangeable.
- The purchaser will be responsible for all duties, taxes and custom fees when importing goods into their country.
- It is the purchaser's responsibility to acquire a custom's broker for international shipments.
- All ARK Performance products may or may not be street legal. It is very important to check your local state laws regarding emissions/sounds and making modifications to your vehicle before using any product. Please check the vehicle code for your state and any additional laws.
- CA Residents: This product may expose you to chemicals including nickel (metallic) and chromium (hexavalent compounds) which are known to the State of California to cause cancer. Learn more at: https://www.p65warnings.ca.gov/
Other top rated products
Your question will appear on the site once someone answers it.
- Reviews (0)
- Questions (0)