GKTech 4130 High Tensile Steel Steering Rack Spacer Set - Nissan Skyline, 350Z, 240SX / Infiniti G35

Name: GKTech 4130 High Tensile Steel Steering Rack Spacer Set - Nissan Skyline, 350Z, 240SX / Infiniti G35
Brand: GKtech
SKU: TROD-EXTN
Price: 32.0 USD
Availability: InStock

by GKtech

$ 32.00

SKU TROD-EXTN

You'll earn OG Points with this product!

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Quantity

Price Match | Make an Offer

Description

The GKTECH high tensile 4130 zinc coated tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock. Great for drift or getting out of parking spots. Can be used either with or without the extra washer (included) to offer a grand total of 0.74'' (19mm) extra lock without compromising on the amount of thread left in the steering rack. - DIY installation (not as easy as the washer install but still not too hard) - CNC machined high tensile zinc coated 4130 steel

Vehicle Compatibility: - Nissan 240sx - Nissan S13 Silvia - Nissan S14 240SX - Nissan S15 240SX - Nissan Skyline R32 GTS-T (2WD) - Nissan Skyline R33 GTS-T (2WD) - Nissan Skyline R34 GTT (2WD) - Nissan Cefiro A31 - Nissan Z32 300ZX - Nissan Z33 350Z - Nissan V35 Skyline

FAQS

Do I need to buy 1 of these rack spacers or 2?

You only need to buy 1 as buying 2 offers no benefit to the improvement of the steering lock. The way that these work is that they take advantage of extra travel available within the steering rack (which does have a limit). Hence the 0.51'' (13mm) bolt on on the LH side of the rack and the 0.23'' (6mm) washer on the RH side of the rack. Adding an extra rack spacer won't give more lock. In the event that your tie rod ends are too short then in that case using another bolt on rack spacer (on the RH side) would be okay.

How does this steering rack spacer work?

The steering rack spacer screws between the steering rack and your LH side tie rod. It allows the steering rack to travel an extra 0.51'' (13mm) while the washer which is to be installed on the RH side allows for an additional 0.23'' (6mm) of travel. Giving a grand total of 0.74'' (19mm) of additional steering rack travel = more lock.

I've installed the rack spacer and I've got a heap of toe in, what happened?

After you have centred your rack (this is CRUCIAL) you may need need to trim your tie rod ends down to counteract the length that you've just put into the length of the rack. Whether you need to trim the tie rods down depends on your setup (Ie. if you've got longer LCA's or aftermarket knuckles you may not need to). Do NOT trim too much off or else you'll need to get a new tie rod and only trim down once you've centred the rack. Note that the LH side has a larger spacer so it will need the most attention.

What's the difference between this screw on steering rack spacer and the lock washers that you sell?

The steering rack spacer gives in total an additional 0.74'' (19mm) of travel where as the lock washers only offer 0.47'' (12mm) of travel (0.23'' (6mm) each)

Compatibility

Our new Compatibility checking feature is still being updated and revised. If you have questions about vehicle fitment, please contact us.

Year	Make	Model	Body	Engine
1989	Nissan	240SX	Coupe	KA24E
1989	Nissan	240SX	Hatchback	KA24E
1989	Nissan	300ZX	4-Seater (2+2)	VG30DETT (Twin Turbo)
1989	Nissan	Skyline	2-Door	RB20DET
1989	Nissan	Skyline	2-Door	RB26DETT
1990	Nissan	240SX	Coupe	KA24E
1990	Nissan	240SX	Coupe	SR20DET
1990	Nissan	240SX	Hatchback	KA24E
1990	Nissan	240SX	Hatchback	SR20DET
1990	Nissan	300ZX	2-Seater	VG30DE (Non-Turbo)
1990	Nissan	300ZX	2-Seater	VG30DETT (Twin Turbo)
1990	Nissan	300ZX	4-Seater (2+2)	VG30DE (Non-Turbo)
1990	Nissan	300ZX	4-Seater (2+2)	VG30DETT (Twin Turbo)
1990	Nissan	Skyline	2-Door	RB20DET
1990	Nissan	Skyline	2-Door	RB26DETT
1991	Nissan	240SX	Coupe	KA24DE
1991	Nissan	240SX	Hatchback	KA24DE
1991	Nissan	240SX	Hatchback	SR20DET
1991	Nissan	300ZX	2-Seater	VG30DE (Non-Turbo)
1991	Nissan	300ZX	2-Seater	VG30DETT (Twin Turbo)

You recently viewed

Clear recently viewed

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.