TBW Aluminum Under Tray for RWD 2014-2019 Infiniti Q50 & 2016-2019 Q60 (V37)

TBW Aluminum Under Tray for RWD 2014-2019 Infiniti Q50 & 2016-2019 Q60 (V37)

Name: TBW Aluminum Under Tray for RWD 2014-2019 Infiniti Q50 & 2016-2019 Q60 (V37)
Brand: TBW
SKU: Q50Rengine
Price: 199.0 USD
Availability: InStock

by TBW

Write a review

$ 199.00

SKU Q50Rengine

You'll earn OG Points with this product!

Pay over time with Affirm. See if you qualify at checkout.

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Color

Installation Hardware

Quantity

Price Match | Make an Offer

Info

Aluminum Under Tray for RWD Infiniti Q50 & Q60 (V37)

Protecting your engine is very important, and the OEM splash shield doesn't do much. This aluminum engine shield is a direct fit for the RWD Infiniti Q50. Not only will it protect better than the plastic splash guard, it will strengthen your bumper and make your vehicle easier to work on. Imagine not having to take the entire under tray off each time you change your oil! The built in oil trap door on this aluminum splash shield will make changing the oil a quick and clean process for your Q50. Sleek, stylish, keeping the engine clean and offering much better protection, all while weighing only a single pound over the stock plastic under tray. Don't hesitate to put this on your car, as it will be one of the best value purchases you can make for your Infiniti Q50.

Protect your VQ with only the best. Made from high quality aluminum, all holes are laser cut to direct fit in the stock location. This version is designed to accommodate larger oil pans, spacers, and some lower front tie braces. Installation is quick and requires little working knowledge. Most people can do it on there own with a floor jack, jack stands, and a 10mm wrench in about 10 minutes!

Features

MADE OF .063 ALUMINUM - only slightly heavier than stock (by ~ 1 lb) but hard aluminum resistant to denting and splitting
LASER CUT - Precise cuts to fit stock mounting points * CLEARANCE - Clearance as good as OEM or better, but stronger which improves airflow
RIGIDITY - Offers better protection while strengthening bumper support for better stability at high speeds
3 PIECE DESIGN - Won't bend the whole thing if you hit a curb, and can replace only the front piece. Easier to work on your engine.
OIL DOOR - The OEM shroud offers little access to the filter. This built in oil door is accessible by removing 2 simple bolts.
VENTED DESIGN - Helps to aid with air flow and heat removal
POWDER COATED - Black powder coated finish for extra durability.

Vehicle Application

2014-2019 Infiniti Q50 (RWD Only)
2016-2019 Infiniti Q60 (RWD Only)

NOTE: IF YOUR Q50 IS AWD YOU WILL NEED THE AWD VERSION

Q&A

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

International Orders

Other top rated products

VIS Racing Z-Speed / CS-Style Rear...

1.0 star rating

(2)

$562.00
VIS Racing Astek Front Bumper...

0.0 star rating

(0)

$665.00
OG Designs QS Front Bumper Kit...

3.2 star rating

(6)

$960.00
VIS Racing Walker / LB-Style Front...

5.0 star rating

(2)

$950.00
OG Designs Kuruma Z Arch Front...

4.2 star rating

(5)

$630.00
Hikkatadori CSL-Style Trunk -...

5.0 star rating

(4)

$715.00
K&N Typhoon Air Intake Dual Kit,...

0.0 star rating

(0)

$549.99
VIS Racing Techno-R / Nismo-Style...

0.0 star rating

(0)

$354.00

0 Questions \ 0 Answers

ask a question

write a review

ask a question

write a review

Thank you for posting a review!

We value your input. Share your review so everyone else can enjoy it too.

Thank you for posting a review!

Your review was sent successfully and is now waiting for our staff to publish it.

Thank you for posting a question!

Please click on the link in the confirmation email we just sent you to submit your question.

Your question will appear on the site once someone answers it.