Stillen Hi-Flow Intake Kit - Q50 - Outcast Garage

Stillen Hi-Flow Intake Kit - Q50

Name: Stillen Hi-Flow Intake Kit - Q50
Brand: Stillen
SKU: 402856DF
Price: 475.0 USD
Availability: InStock

by Stillen

$ 475.00

SKU 402856DF

You'll earn OG Points with this product!

Pay over time with Affirm. See if you qualify at checkout.

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Filter

Quantity

Price Match | Make an Offer

Info

Hi-Flow Intake Kit by Stillen

The first step in upgrading your Q50's performance is to replace the restrictive stock air box with a STILLEN High Flow Cold Air Intake system. It might just be the best dollar-per-horsepower investment you make! When you install a STILLEN air intake, you can be confident you're using the best air intake kit on the market - one you can be sure delivers the performance gains you're seeking. All STILLEN air intakes are designed, tested and manufactured right here at our Orange County California facilities. Our engineers develop and optimize each intake to generate peak horsepower and torque increases across the RPM range. Once a design is finalized, our expert craftsman manufacture and assemble each air intake kit with pride and precision. The STILLEN cold air high flow air intake system is designed for Q50 owners seeking improved performance along with a visual upgrade to the engine compartment For years STILLEN has been recognized as the leader in performance parts for the Nissan/Infiniti vehicles. For the Q50 performance air intake, STILLEN engineers adapted some of the elements of our highly successful Gen 2 intakes for the G37 and 370Z.

The results: more power, better sound and enhanced appearance in the engine compartment

Features:

Polished Aluminum Mandrel Bent Pipes Completely Replace Factory Tubes
Silicone Connectors
True Cold Air design via Urethane Boxes
Genuine K&N Filters - Dual Cone w/Integrated Velocity Stack
Filters have a 1,000,000 Mile Warranty from K&N
No Check Engine Light (CEL) Problems
No Chance of Hydrolocking
Ease of access to filter elements
Easy to Follow Instructions

Vehicle Application

2016-Current Infiniti Q50 (3.0tt Sport and Red Sport)

Note:

Note that the high flow design increases the volume of engine note both inside and outside the cabin. Performance-minded enthusiasts typically find the authoritative note of a high flow air intake pleasing.

Q&A

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

International Orders