Ichiba Version II Wheel Spacers - 370Z

Name: Ichiba Version II Wheel Spacers - 370Z
Brand: Ichiba
SKU: ICH-WS-25511466A
Price: 125.0 USD
Availability: OutOfStock

by Ichiba

Write a review

Discontinued

$ 135.00

$ 125.00

SKU ICH-WS-25511466A

You'll earn OG Points with this product!

Pay over time with Affirm. See if you qualify at checkout.

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Spacer Size

Quantity

Price Match | Make an Offer

Info

Version II Wheel Spacers by Ichiba - 370Z

Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Every spacer is a two piece design with pressed studs. Spacers bolts onto the existing studs. These are hubcentric spacers that is vehicle specific; will fit onto your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

Vehicle Application

2009-2016 Nissan 370Z

Note

Must check the wheels have open slots or cavities when you are going to purchase Version II 15MM Wheel spacers.
If your wheels are solid surface, we highly recommended to purchase Version I 15MM Wheel spacers, otherwise the OEM studs must be shortened so that your wheels can sit flush against the spacers!
5:114.3 / 66.2 BORE / 12x1.25

Q&A

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

International Orders

Other top rated products

VIS Racing Z-Speed / CS-Style Rear...

1.0 star rating

(2)

$562.00
VIS Racing Astek Front Bumper...

0.0 star rating

(0)

$665.00
OG Designs QS Front Bumper Kit...

3.2 star rating

(6)

$960.00
VIS Racing Walker / LB-Style Front...

5.0 star rating

(2)

$950.00
OG Designs Kuruma Z Arch Front...

4.2 star rating

(5)

$630.00
Hikkatadori CSL-Style Trunk -...

5.0 star rating

(4)

$715.00
K&N Typhoon Air Intake Dual Kit,...

0.0 star rating

(0)

$549.99
VIS Racing Techno-R / Nismo-Style...

0.0 star rating

(0)

$354.00

0 Questions \ 0 Answers

ask a question

write a review

ask a question

write a review

Thank you for posting a review!

We value your input. Share your review so everyone else can enjoy it too.

Thank you for posting a review!

Your review was sent successfully and is now waiting for our staff to publish it.

Thank you for posting a question!

Please click on the link in the confirmation email we just sent you to submit your question.

Your question will appear on the site once someone answers it.