AMS Red Alpha High Pressure Fuel Pump - Infiniti Q50 / Q60 (VR30) - Outcast Garage

AMS Red Alpha High Pressure Fuel Pump - Infiniti Q50 / Q60 (VR30)

Name: AMS Red Alpha High Pressure Fuel Pump - Infiniti Q50 / Q60 (VR30)
Brand: AMS Performance
SKU: ALP.28.07.0001-1
Price: 1406.45 USD
Availability: InStock

by AMS Performance

Save 3%

$ 1,449.95

$ 1,406.45

SKU ALP.28.07.0001-1

You'll earn OG Points with this product!

(Click to Pre-Qualify)

Please carefully review the vehicle application below before purchasing.

Quantity

Price Match | Make an Offer

Introducing the Q50 Q60 VR30 Red Alpha High Flow Fuel Pump Kit. This pump is CFD-Optimized, E-85 compatible, all stainless steel, laser welded construction, and is capable of flowing over 36% more fuel than the stock unit!

vr30 high pressure fuel pump E-85 mods

AMS Performance is excited to announce the release of a high performance, E-85 compatible, and reliable fueling solution for the INFINITI VR30DDTT! Introducing the INFINITI VR30 Red Alpha High Pressure Fuel Pump Kit. It’s simple, if you want to make more power you are going to need more fuel.

This pump features high quality all stainless steel construction. Use of the laser welding process insures that any potential leaks are non existent. The pump comes complete with direct fit hardware kit. Like all Alpha products construction and performance are of the highest measure.

Engineered to be the Best

AMS Performance partnered with an industry leader in fuel pumps, Nostrum Energy, in the development of this component. For this reason our customers know that they can rely on our fuel pumps to be the best built, best performing on the market.

Through the use of Computational Fluid Dynamics (CFD) the Red Alpha High Pressure Fuel Pump mapping shows the optimized fuel flow trajectories. Our pump piston diameter is an incredible 36% larger than stock. This yields a 36% increase in fuel capacity and an incredible rate of 350 LPH!

The Red Alpha VR30 pumps come fully assembled for a quick, bolt-on upgrade and use all OEM type fuel fittings and electrical connectors. The Red Alpha VR30 High Pressure Fuel Pump upgrade utilizes OEM-type low and high pressure fittings. Each individual pump is flow tested to insure the ultimate in performance, and comes with comprehensive installation instructions by clicking HERE. The pump has an incredible maximum operating pressure of 200 bar!

Q50 Q60 E85 Red Alpha Fuel Pump mods upgrade kit

E85 INFINITI Q50 Q60 fuel pump mods upgrade kit

vr30 high pressure fuel pump

Green plots are the Red Alpha Tune using E-85 with FBO’s, red plots are average of Customer Red Alpha Tunes, blue plots are average stock Red Sports.

Features

E-85 Compatible
36% Larger Pump Piston Diameter Over Stock
36% Increase in Fuel Capacity
Capable of Flowing Over 350 LPH
CFD Optimized
All Stainless Steel Construction
Laser Welds Mean the Pump is Sealed with no Leaks
Fully Flex Fuel Compatible
Comes Fully Assembled
Mounting Flange and Electric Harness Adapter Included
Also Includes Installation Hardware
Utilizes OEM-type Low and High Pressure Fittings
Each Individual Unit is Flow Tested
200 Bar Maximum Operating Pressure
Comprehensive Installation Instructions – HERE

WARNING/DANGER: SERIOUS RISK OF FIRE, EXPLOSION, BODILY INJURY INCLUDING RESULTING DEATH, AND ENGINE, VEHICLE, AND OTHER PROPERTY DAMAGE. THIS FUEL PUMP MUST BE INSTALLED AND REMOVED ONLY BY A QUALIFIED MOTOR SPORTS TECHNICIAN. TECHNICIAN ALSO MUST BE TRAINED IN HOW TO INSTALL AND REMOVE THIS PUMP FROM THIS SPECIFIC VEHICLE. TECHNICIAN MUST NOT SMOKE OR PARTICIPATE IN ANY ACTIVITY THAT WOULD BE CONSIDERED A CATALYST FOR IGNITION WHILE INSTALLING OR REMOVING PUMP AND MUST READ THE INSTALLATION INSTRUCTIONS AT https://www.amsperformance.com/wp-content/uploads/bsk-pdf-manager/Infiniti_Alpha_HPFP_V2_108.pdf BEFORE INSTALLATION OR REMOVAL.

You recently viewed

Clear recently viewed

Product Disclaimers

Aftermarket Body Kits (Authentic & Replica)

Aftermarket body kits, whether authentic or replica will always require extra work to dial-in the fitment to the end-users liking. We highly recommend utilizing a custom professional body shop with aftermarket body kit experience in fiberglass or carbon fiber. Each brand will have different tolerances for fitment. Some will fit better than others. The body kit's material will also come into play (e.g. fiberglass, polyuretehane, carbon fiber, etc). The purchaser/end-user is fully responsible for finding the appropiate body shop and all fees associated with installation, fitment, modifcation, preparation and paint associated with the product.

Installation and Paint of Body Kits

A professional and custom body shop experienced in aftermarket fiberglass and carbon fiber body kits is required for proper installation and painting of these products. Aftermarket body kits do not fit like OEM products and generally require extra work for optimal fitment. Fitment will be dependent on the quality of the body shop choosen. A dry test fit is required before any modifications and painting is done. Outcast Garage nor the respective manufacturer will not be able to warranty a defective product if it has been modified or painted without a proper dry test fit nor be responsible for any credit towards labor or paint if the product is defective. An inexperienced or incorrect body shop may result in high labor rates, ill-fitting parts, and peeling paint.

Fiberglass (FRP)

There will always be minor sanding, shaving, cutting, tweaking, adjusting, drilling and/or filling will be required prior to installing these parts. All primer finish included with the parts but be sanded as well as other preparation work required before painting. All fitting and paint preparation is the responsibility of your body shop. The product's respective manufacturer nor Outcast Garage will be responsible for the quality of a body shop's work if it does not meet the customer's expectations. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Any part that is modified is non-returnable and no refund wil be given.

Carbon Fiber Care (CF, CFRP)

All carbon fiber products will require an automotive-grade clear coat for protection against the sun's UV rays unless the clear coat is included with the product from its respective manufacturer. Products infused with a 'UV Protection Resin Gel' should still be covered with an automotive-grade clear coat. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will be not not warranty or be responsible for discoloration of the carbon fiber nor be responsible for the quality of the clear coat applied by the body shop if it does not meet the customer's expectations.

Hand-Laid Carbon Fiber (CF, CFRP)

The 'Carbon Fiber Care' disclaimer also applies to hand-land carbon fiber products. Depending on the complexity and design of the product, there may be a slight and minor shift in the carbon fiber weaves. It is almost impossible to achieve 'perfection' with hand-land carbon fiber. These 'slight and minor shifts' in the carbon fiber weaves does not equate to the product being defective. If the weaves are extreme, and do not fall within an acceptable tolerance, then it will be eligible for a warranty replacement if the product has not been altered in anyway. A warranty claim must be filed first before any further action can be taken. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. Outcast Garage will not be responsible for a refused shipment of a carbon fiber product if it does not meet expectations without first initiating a warranty claim and receiving approval. Inspections and refusing of shipments are only for damaged products during transit (cracks, chips, bends, holes, scratches, etc).

Polyurethane Care, Installation & Painting (Poly)

All polyurethane parts will come raw and unpainted. These parts are flexible so they may slightly warp during shipment. Slightly warped polyurethane parts are not considered defective. They will require a few hours of sunlight to return to its original shape from when it came out of the mold. Polyurethane parts are much different than factory OEM parts and require specific preparation before painting. Improper paint preparation will result in the paint not adhering to the bumper, pin holes and bubbles. It is normal for polyurethane parts to come slightly scratched with imperfections. Proper sanding during paint preparation will remove all imperfections. Please seek a professional and reputable body shop with experience with polyurethane aftermarket parts. Body kits must be test fitted on the vehicle prior to painting to check for any manufacturer's defect. The product's respective manufacturer nor Outcast Garage will not be responsible for the body shop's preparation, fitting and paint job if it does not meet the customer's expectations.

AMS Red Alpha High Pressure Fuel Pump - Infiniti Q50 / Q60 (VR30)

Engineered to be the Best

You recently viewed

QUESTIONS & ANSWERS

Have a Question?

Main Menu

Added to your cart:

Body Kits Ship for FREE to Lower 48 States

AMS Red Alpha High Pressure Fuel Pump - Infiniti Q50 / Q60 (VR30)

Engineered to be the Best

Related products

AMS Performance Red Alpha Cold Air Intake System - Infiniti Q50 / Q60 3.0tt

AMS Performance

AMS Red Alpha Heat Exchanger - Infiniti Q50 / Q60 3.0tt (VR30)

AMS Performance

AMS Red Alpha Driveshaft by Driveshaft Shop (Carbon Fiber / Aluminum) - Infiniti Q50 / Q60 (AWD)

AMS Performance

AMS Red Alpha RWD Driveshafts by DriveShaft Shop (Carbon Fiber / Aluminum) - Infiniti Q50 / Q60 (RWD)

AMS Performance

You recently viewed

QUESTIONS & ANSWERS

Have a Question?

Main Menu

Subscribe

Follow us

WHAT'S YOUR EMAIL?